MODEL ENGINEERING SUPPLIES

MODEL ENGINEERING : MATERIALS : STEEL : BRASS : COPPER : ALUMINIUM : ETC : LOCOMOTIVE DRAWINGS & GM OR IRON CASTINGS : STEAM FITTNGS : BOGIES : SCREWS : RIVETS : SOLDERS : TOOLING : OILS : METAL FINISHING : MODEL ENGINEERING BOOKS : ETC.

ALL PRICES INCLUDE VAT
CARBIDE BRAZED TURNING & THREAD CUTTING TOOLS
Great value brazed carbide tipped tools for roughing,
turning, facing, threading & boring.
Available in sets of 6 or sold individually. Hard wearing,

Use on Steel, Brass, Stainless etc.
Essential for turning Cast Iron Wheels and Cylinders.
CLICK ON PICTURE TO ENLARGE

Page: 1 2


	CARBIDE TIPPED TOOL-ROUND NOSED TOOL 1/4" SHANK.....PART No.131150		03.65
	CARBIDE TIPPED TOOL-RIGHT HAND FACING TOOL 1/4" SHANK.....PART No.131180		03.65
	CARBIDE TIPPED TOOL-LEFT HAND TURNING TOOL 1/4" SHANK.....PART No.131200		03.65
	CARBIDE TIPPED TOOL-PARTING OFF TOOL 1/4" SHANK.....PART No.131230		03.65
	CARBIDE TIPPED TOOL-ROUGHING TOOL 1/4" SHANK.....PART No.131260		03.65
	CARBIDE TIPPED TOOL-RIGHT HAND TURNING TOOL 1/4" SHANK.....PART No.131280		03.65
	CARBIDE TIPPED TOOL-ROUND NOSED TOOL 5/16" SHANK.....PART No.131155		03.65
	CARBIDE TIPPED TOOL-RIGHT HAND FACING TOOL 5/16" SHANK.....PART No.131185		03.65
	CARBIDE TIPPED TOOL-LEFT HAND TURNING TOOL 5/16" SHANK.....PART No.131205		03.65
	CARBIDE TIPPED TOOL-PARTING OFF TOOL 5/16" SHANK.....PART No.131235		03.65
	CARBIDE TIPPED TOOL-ROUGHING TOOL 5/16" SHANK.....PART No.131265		03.65
	CARBIDE TIPPED TOOL-RIGHT HAND TURNING TOOL 5/16" SHANK.....PART No.131285		03.65
	CARBIDE TIPPED TOOL-ROUND NOSED TOOL 3/8" SHANK.....PART No.131160		03.65
	CARBIDE TIPPED TOOL-RIGHT HAND FACING TOOL 3/8" SHANK.....PART No.131190		03.65
	CARBIDE TIPPED TOOL-LEFT HAND TURNING TOOL 3/8" SHANK.....PART No.131210		03.65
	CARBIDE TIPPED TOOL-PARTING OFF TOOL 3/8" SHANK.....PART No.131240		03.65
	CARBIDE TIPPED TOOL-ROUGHING TOOL 3/8" SHANK.....PART No.131270		03.65
	CARBIDE TIPPED TOOL-RIGHT HAND TURNING TOOL 3/8" SHANK.....PART No.131290		03.65
	CARBIDE TIPPED TOOL-ROUND NOSED TOOL 1/2" SHANK.....PART No.131165		04.95
	CARBIDE TIPPED TOOL-RIGHT HAND FACING TOOL 1/2" SHANK.....PART No.131195		04.95
	CARBIDE TIPPED TOOL-LEFT HAND TURNING TOOL 1/2" SHANK.....PART No.131215		04.95
	CARBIDE TIPPED TOOL-PARTING OFF TOOL 1/2" SHANK.....PART No.131245		04.95
	CARBIDE TIPPED TOOL-ROUGHING TOOL 1/2" SHANK.....PART No.131275		04.95
	CARBIDE TIPPED TOOL-RIGHT HAND TURNING TOOL 1/2" SHANK.....PART No.131295		04.95
	CARBIDE TIPPED TOOL-EXTERNAL THREADING TOOL 55 deg WHITWORTH FORM 1/4" SHANK.....PART No.130900		03.65
	CARBIDE TIPPED TOOL-LEFT HAND FACING TOOL1/4" SHANK.....PART No.130920		03.65
	CARBIDE TIPPED TOOL-EXTERNAL THREADING TOOL 60 deg METRIC FORM 1/4" SHANK.....PART No.130940		03.65
	CARBIDE TIPPED TOOL-BORING TOOL 1/4" SHANK.....PART No.130960		05.60
	CARBIDE TIPPED TOOL-INTERNAL THREADING TOOL 55 deg WHITWORTH FORM-1/4" SHANK.....PART No.130980		05.60
	CARBIDE TIPPED TOOL-INTERNAL THREADING TOOL 60 deg METRIC FORM 1/4" SHANK.....PART No.131100		05.60

Page: 1 2

STEEL BILLETS
CUT TO SIZE
UP TO 10" DIAMETER

RING 01327 878988 FOR
GLR GIFT VOUCHERS

DIRECTIONS TO GLR

VERTICAL BOILERS

STATIONARY ENGINES

MODEL MAKING BOOKS

MATERIALS : BUDGET PACKS - UP TO 25% OFF

MATERIALS-ROUND

MATERIALS-SQUARE

MATERIALS HEXAGON

MATERIALS-ANGLE

MATERIALS-SHEET

MATERIALS-SILVER STEEL

MATERIALS-TUBE STEEL ALUMINIUM

MATERIALS-TUBE COPPER BRASS

MATERIALS-FINE GAUGE SIZES

MATERIALS-CAST IRON NYLON-PTFE

MATERIALS-GUAGE PLATE-SHIMPACKS

MATERIALS STUDDING

DRILLS - METRIC HIGH SPEED

DRILLS - IMPERIAL HIGH SPEED

DRILLS - NUMBERS

DRILLS BLACKSMITHS REDUCED SHANKS

DRILLS SETS-SHEET DRILLS-CENTRE DRILLS

HAND REAMERS MORSE TAPER REAMERS

SLOT DRILLS-END MILLS TC3 COMBINATION CUTTERS

DOVETAIL WOODRUFF - TEE SLOT CUTTERS

ALLEN SCREWS CAPHEAD & GRUBS

B.A. SCREWS CHEESE - ROUND C/SUNK HEADS

BA HEXAGON HEAD SET SCREWS

PB & NC BALLS KNOBS - BEARINGS BELT - TUBING

SILICONE O'RINGS SUITABLE FOR STEAM

RIVETS-RIVET SNAPS DOMING BLOCKS

SPRINGS COMPRESSION & TENSION - ALL SIZES

TAPPING DRILL SIZES

TAPS & DIES - MODEL ENGINEER THREADS

TAPS & DIES-METRIC THREADS

TAP & DIES - B.A. THREADS

TAPS & DIES-BSP-BSF BSW-UNF-UNC THREADS

TAP WRENCHES DIESTOCKS TAILSTOCK DIEHOLDERS

OILS - JOINTING BOILER LAGGING

SOLDERS - FLUX SOLDERING EQUIPMENT

ADHESIVES-INSTANT GASKET-PIPE SEALANT SOLVENT

EZE LAPS-GREEN GRIT WHEELS-WHEEL DRESSERS

EYE LOUPES-LAMPS VISION VISORS

ROUND BAR CENTRE FINDERS

BOX SPANNERS-PIN VICES CENTRE PUNCHES ETC.

PARTING TOOLS KNURLING TOOLS SLITTING SAWS

CHUCKS-BACK PLATES TOOLPOSTS-LATHE DOGS

COLLETS - MT - R8 ER - 5C - POSILOCK

"NEW" CARBIDE TIPPED TOOLS

"CARBIDE TIPPED TOOLS & HSS TOOLBITS

FLYCUTTING-BORING CARBIDE END MILLING

LIVE CENTRES-LATHE CHUCKS-DRILL CHUCK ARBORS

VICES - ANGLE PLATES - CLAMP KITS PACKING BLOCKS

MICROMETER VERNIERS-V BLOCKS SQUARES-THREAD GAUGES

ACID SALTS-METAL BLACK-NICKEL PLATE

STEAM FITTINGS PRESSURE GAUGES ETC.

NEW "FLYWHEELS" CAST IRON AXLE BOXES

"AUSTERE ADA" 2.1/2"g

"FAYETTE" 2.1/2"g

"OLYMPIADE" 2.1/2"g

"PURLEY GRANGE" 2.1/2"g

"SOUTHERN MAID" 2.1/2"g

"CANTERBURY LAMB" 3.1/2"g

"CITY OF TRURO" 3.1/2"g

"DORIS" 3.1/2"g

"HIGHLAND LASSIE" 3.1/2"g

"JULIET" 3.1/2"g

"MAISIE" 3.1/2"g

"MOLLY" 3.1/2"g

"MISS 10 to 8" 3.1/2g

NEW "NORTHUMBRIAN" 3.1/2"g

"PETROLEA" 3.1/2"g

P.V. BAKER" 3.1/2"G

"RAINHILL" 3.1/2"g

"ROB ROY" 3.1/2"g

"TICH S/B" 3.1/2"g

"TICH L/B 3.1/2"g

"VIRGINIA" 3.1/2"g

"DEAN GOODS" 5"g

"DOHLPUR" 5" ng

"KING JOHN" 5"g

"MAID OF KENT" 5"g

"NINE ELMS" 5"g

"SALISBURY" 5"g

"SPRINGBOK" 5"g

"TWIN SISTERS" 5"g

BOGIES & LASER CUT FRAMES

MORE TO FOLLOW

ORDERS TAKEN BY PHONE, POST, FAX OR INTERNET

LOCOMOTIVES - CASTINGS - DRAWINGS - MATERIALS
www.modelmakingsupplies.co.uk is powered by eCommerce Website Builder (Sell Products Online)